Page 1 of 1
How to curve pixels and create circles and cylinders?
Posted: 10 Oct 2020, 12:26
by 1Code
1. Draw 5 of the 2 white horizontal pixels down from the center of the left and right corners tiles
2. Do the same on the SE and SW tiles but 4 and blue
3. Add 3 of the 3 horizontal white pixels down and next to the last 2 horizontal blue pixels on the same tiles
4. Draw 12 horizontal blue pixels down and next to the last 3 horizontal white pixels on the left and right
Re: How to curve pixels?
Posted: 10 Oct 2020, 12:44
by 1Code
1. Draw 5 of the 2 horizontal white pixels down from the center on the top and bottom tiles
2. Do the same on the NE and SE tiles but 4 and blue
3. Draw 4 diagonal white pixels down and next to the last 2 blue pixels on the same tiles
4. Draw 2 vertical blue pixels down and next to the last white pixel
5. Do the same here but 3 and white
Re: How to curve pixels?
Posted: 10 Oct 2020, 12:45
by 1Code
If you want to create a circle then follow this pattern as an example
You can also draw a cylinder using the same 2 circles
Re: How to curve pixels?
Posted: 09 Nov 2020, 17:34
by 1Code
- e.png (3.16 KiB) Viewed 2628 times
Re: How to curve pixels?
Posted: 10 Nov 2020, 05:10
by TheFennekin
Thanks for this tutorial! I give you these
Re: How to curve pixels?
Posted: 10 Nov 2020, 18:52
by 1Code
- e2.png (1.11 KiB) Viewed 2627 times
Re: How to curve pixels and create circles and cylinders?
Posted: 01 Jun 2021, 06:02
by Designer Anthony
How about a trident or a Y-shaped building? Maybe you can do it.