Tai Hing Estate

[Designer Anthony]

Hello!

taihingestatethumbnail.png (5.79 KiB) Viewed 7430 times

Tai Hing Estate is a public housing estate in Hong Kong. The blocks are shaped like a cross and have 30 stories in height. Due to this, I split it into 4 variants. It goes from 5 to 30 stories. Therefore, we call it "30-Story Cruciform Blocks".

About th "30-Story Cruciform Blocks: Link: https://zh.m.wikipedia.org/wiki/30%E5%B ... 7%E5%BB%88
This type contains 48 units per floor, with 4 wings with 2 units each. Only two estates currently have these type of blocks as of today. The building area is 80x80 m. Due to its large size, it was discontinued and would no longer be built in future estates/projects. That is why I am releasing this plugin so you can build a estate like this.

Note: Ground transparent.

Download:

taihingestate.zip

(12.79 KiB) Downloaded 1175 times

[CommanderABab]

nul.png (1.59 KiB) Viewed 7413 times

[Designer Anthony]

nul.png

I don't have a ground, so...

[yusuf8a684]

nul.png

I don't have a ground, so...

You can still add transparent colors to ground and make shadows.
Also roof top square has wrong shadows. It should go to tge right instead of left

[Carlão da massa]

Anthony, here is a quick example of how you can use shadows to enhance your designs.
Use this sketch however you like

taihingestatethumbnail.png (15.34 KiB) Viewed 7349 times

Any questions about how to achieve this result, you can dm me on discord (El Karlo, on the TT server) I put together a short video showing the process layer by layer for you!

[The_Real_Michael_1]

Anthony, here is a quick example of how you can use shadows to enhance your designs.
Use this sketch however you like ;)taihingestatethumbnail.png

Any questions about how to achieve this result, you can dm me on discord (El Karlo, on the TT server) I put together a short video showing the process layer by layer for you!

This is tons better

[The_Real_Michael_1]

But Anthony's is still fine

[CommanderABab]

nul.png

download/file.php?id=37818

[Naufhal]

nul.png

download/file.php?id=37818

What wrong? My shadows are corrected. But what is this?

[Bevise]

Anthony, here is a quick example of how you can use shadows to enhance your designs.
Use this sketch however you like ;)taihingestatethumbnail.png

Any questions about how to achieve this result, you can dm me on discord (El Karlo, on the TT server) I put together a short video showing the process layer by layer for you!

It looks very good right now!!