Page 1 of 1
CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 13 Oct 2023, 20:46
by FVI
A MEU owned company
CEMEF (Central Europe Metalworking and Engeneering Federation) is a multi state owned company based in Bologna which is used in the Metalworking and engineering sector, which is the production of public transport including buses, trains and aircraft. CEMEF is committed to producing quality and cutting-edge means of transport.
Show
How to acquire (In RP)To purchase one of our products, simply post an order in this thread.
CB-10
The CEMEF CB-10 is a Euro 6 hybrid bus very good for medium sized cities. We also got a hydrogen powered version.
Product name | Price | Autonomy | Capacity | Pros | Cons | Max speed |
CB-10 | 300.000€ | 600 km | 80-100 people | Cheap, Low emissions, high capacity | Relatively frequent maintenance, Relatively slow, Hard steering wheel | 55kmh |
CB-20
The CEMEF CB-20 is a Euro 6 articulated bus, and an electric or trolleybus version is available too.
Product name | Price | Autonomy | Capacity | Pros | Cons | Max speed |
CB-20 | 550.000€ | 600 km | 150 people | Cheap, Low emissions, Fast, Silent | Low capacity | 65kmh |
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 18 Oct 2023, 19:42
by FVI
Today, after a very short time of activity, we launched our first product! The CB-10 is an urban Euro 6 hybrid bus with a capacity of 80-100 people and a range of 600 km per tank. We will soon test a hydrogen version of this bus.
A CEMEF CB-10 bus in front of the CEMEF factory in Bologna
Made by AI
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 26 Nov 2023, 12:08
by FVI
We started with Aftororszag (Furballland) to develop a new supersonic passenger aircraft, and we hope it to fly in the next couple of years. We got based from the already existing retired passenger aircraft to then design it to not encounter economic and mechanic issues that caused the grounding of the TU 144 and the Concorde. The prototype is called "SST-1" and we will hopefully bring back supersonic jet travel!
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 31 Mar 2024, 19:54
by Greatguy10023
Hi I would like 10x CB -10s for Davon Transit pls
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 31 Mar 2024, 20:49
by FVI
Sure!
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 02 Apr 2024, 10:08
by Greatguy10023
Yay
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 20 Apr 2024, 09:38
by FVI
Time to change the name because I don't like the old one anymore!
By the way suggestions are accepted.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 20 Apr 2024, 10:59
by Mendel
How about a tram? how much is a tram?
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 20 Apr 2024, 11:14
by FVI
Mendel wrote: ↑20 Apr 2024, 10:59
How about a tram? how much is a tram?
Since CEMEF is a new company, we only produce buses for now, which are easier and quicker to build. Regarding trams, chain production has already started from a while, but none has actually been finished for now. However, according to our time table, the first trams will go on the market in a few months.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 20 Apr 2024, 11:16
by Mendel
oh, It's fine actually. I just wanted to stock up on them in case the transit is used more than before.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 13:20
by Mendel
How about the CB २० Or what it is called.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 17:20
by FVI
Mendel wrote: ↑24 Apr 2024, 13:20
How about the CB २० Or what it is called.
Do you mean the CB-20? If that's the case, it is a bus.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 17:25
by Mendel
yes, I know. How much for 24? We really need some capacity.
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 17:30
by FVI
The price for 24 CB-20's is 13.200.000€
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 17:34
by Mendel
In Sethland dollars?
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 17:40
by FVI
Mendel wrote: ↑24 Apr 2024, 17:34
In Sethland dollars?
No, this is the price in Euros. One Euro worth slightly more than one Dollar, so if converted in Dollars, 24 CB-20's cost more or less $14.000.000
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 24 Apr 2024, 18:00
by Mendel
done!
Re: CEMEF (Central Europe Metalworking and Engeneering Federation) showcase
Posted: 03 May 2024, 07:25
by Mendel
The
Roleplay Market has opened, come to buy!