Higher level bridges

[Lobby]

See here on how to create a plugin road. In order to support higher level bridges you have to provide separate frames for the ramp so there's a total of 16 frames per bridge.

These frames may look like that (32x48 pixels each)

bridge_frames_updated.png

Not that you might have to adjust your piles to be stackable.

You can use it like that

Code: Select all

"bridge frames":[{"bmp":"bridge_frames.png","w":32,"h":48,"count":16}],
"bridge height":12,
"frames per bridge":16  // You have to tell the game that there are 16 instead of 12 frames for each bridge type

The game will allow higher level bridges for any roads that provide 16 frames per bridge as shown above.

You can manually set the max bridge level by using

Code: Select all

"max level":3

in your road code. 3 is default for roads that provide 16 frames. Up to level 4 16 is supported right now (version 435 440).

[CommanderABab]

That was 20 frames! he fixed it!

[Lobby]

Thank you

[Mg3094066]

Only the other 3 types are missing

[CommanderABab]

Only the other 3 types are missing

That's where you have to make your own

[Mg3094066]

(._.?) wait...
What can i do with this?

Bridge_frames2.png

Bridge_frames.png

PS: U can use it freely just mention me in the credits for know the existense of the plugin

[Lobby]

I updated the frames in World texture

[Mg3094066]

Ok we must to introduce this bridge tipe for my road for make it work?

Code: Select all

"frames per bridge":16

[CommanderABab]

Ok we must to introduce this bridge tipe for my road for make it work?

Code: Select all

"frames per bridge":16

Yes!

[Mg3094066]

Now i will fix this 3 issues: and next go for tunnels

[CommanderABab]

http://www.theotown.com/forum/viewtopic ... 264#p87264

[Mg3094066]

Ok maybe i have a proble with this:

[Lobby]

You might have to redo this part. The easiest way is probably to recolor the matching frames from the world texture.

The old ramps used a visual trick to mimic 12 pixel height bridges. The problem is that this technique isn't stackable, so these frames changed a bit to be actually 12 pixels height.

[Mg3094066]

You might have to redo this part. The easiest way is probably to recolor the matching frames from the world texture.

The old ramps used a visual trick to mimic 12 pixel height bridges. The problem is that this technique isn't stackable, so these frames changed a bit to be actually 12 pixels height.

This is a little complicated, the game stops when i build a bridge that have the ramps.
There are an error?:

[Mg3094066]

*Beta Edition*

[KINGTUT10101]

Do these frame replace the normal bridge frames?

[Mg3094066]

@Lobby there are the redrew image

[Lobby]

@KINGTUT10101 yes
@Mg3094066 may you show your code, please? The game won't crash because of pixel issues.

[Mg3094066]

@KINGTUT10101 yes
@Mg3094066 may you show your code, please? The game won't crash because of pixel issues.

Code: Select all

[
   {
      "id":"$4laneRoadMg3094066$",
	  "type":"road",
     "connectable": true,
	  "level":3,
     "width":2,
	  "frames":[
{"bmp":"roadL3.png","w":32,"h":15,"count":16},
{"bmp":"roadR2.png","w":32,"h":15,"count":16},
{"bmp":"roadR1.png","w":32,"h":15,"count":16},
{"bmp":"roadL4.png","w":32,"h":15,"count":16},
],
	  "speed":3.0,
      "traffic lights":
      [{"bmp":"tf.png","w":32,"h":32,"count":4}],
      "green phase":10000,
      "yellow phase":1000, 
	  "price":210,
	  "monthly price":3,
      "title":"Mexican Highway",
      "text":"if German highways you seem a little rare here we have a Highway made and drawn in Mexico. ;)",
       "auto join":true,
       "one way":true,
       "frames per bridge":16,
       "bridge frames":[{"bmp":"Bridge_frames.png","count":12,"h":34,"w":32}],
"bridge height":12,
"bridge price":370,
"tunnel frames":[{"bmp":"tunnel_frames.png","x":0,"w":16,"h":19,"handle y":7}, 
{"bmp":"tunnel_frames.png","x":16,"w":16,"h":19,"handle x":-16,"handle y":7}, 
{"bmp":"tunnel_frames.png","x":32,"w":16,"h":19,"handle y":7}, 
{"bmp":"tunnel_frames.png","x":48,"w":16,"h":19,"handle x":-16,"handle y":7}]
}
]

[Lobby]

I found a syntax mistake using JSONLint:

Code: Select all

			"count": 16
		},
		{
			"bmp": "roadL4.png",
			"w": 32,
			"h": 15,
			"count": 16
		},
	],

Remove the , before the last } of this excerpt.